Thesis: Structure change: feedback Harm

Had a short discussion on the structure with Harm.

Introduce new chapter on waveforms and ways to analyse them.

Also, move the single sine period degeneracy to a separate chapter.

documents/thesis/chapters/introduction.tex

@@ -11,39 +11,26 @@
 \label{sec:introduction}
 
 
-\section{Cosmic Rays}
+\section{Cosmic Particles}
 \label{sec:crs}
+Particles from outer space,
+Particle type,
+Energy,
+magnetic fields -- origin,
 
-\subsection{Airshowers}
+\subsection{Air Showers}
 \label{sec:airshowers}
+Particle cascades,
+Xmax?,
+Radio emission,
 
-\subsection{Detectors}
+\subsection{Experiments}
 \label{sec:detectors}
 Standalone devices,
 \gls*{PA},
-\gls*{GRAND}
-
-\section{Time Synchronisation}
-\label{sec:timesynchro}
-The main method of synchronising multiple stations is by employing a \gls{GNSS}.
-This system should deliver timing with an accuracy in the order of $10\ns$ \cite{} (see Section~\ref{sec:grand:gnss}).
-\\
-
-Need reference system with better accuracy to constrain current mechanism (Figure~\ref{fig:reference-clock}).
-
-\begin{figure}
-	\centering
-	\includegraphics[width=0.5\textwidth]{clocks/reference-clock.pdf}
-	\caption{
-		Using a reference clock to compare two other clocks.
-	}
-	\label{fig:reference-clock}
-	\todo{
-		redo figure with less margins,
-		remove spines,
-		rotate labels
-	}
-\end{figure}
+AugerPrime RD,
+\gls*{GRAND},
+\gls*{LOFAR}?,
 
 
 \section{Interferometry}
@@ -93,4 +80,27 @@ Requires $\sigma_t \lesssim 1\ns$ \cite{Schoorlemmer:2020low}
 	\caption{Trace overlap due to wrong positions}
 	\label{fig:trace_overlap}
 \end{figure}
+
+\section{Time Synchronisation}
+\label{sec:timesynchro}
+The main method of synchronising multiple stations is by employing a \gls{GNSS}.
+This system should deliver timing with an accuracy in the order of $10\ns$ \cite{} (see Section~\ref{sec:grand:gnss}).
+\\
+
+Need reference system with better accuracy to constrain current mechanism (Figure~\ref{fig:reference-clock}).
+
+\begin{figure}
+	\centering
+	\includegraphics[width=0.5\textwidth]{clocks/reference-clock.pdf}
+	\caption{
+		Using a reference clock to compare two other clocks.
+	}
+	\label{fig:reference-clock}
+	\todo{
+		redo figure with less margins,
+		remove spines,
+		rotate labels
+	}
+\end{figure}
+
 \end{document}